# Graphene Sparks: Solar Breakthroughs & Superconductivity!

Newsy: Graphene Gazzette
Published: 2025-11-26T15:00:00.270Z
Source: https://newsyai.com/edition/bef1f61b-ef34-4812-89df-770bc4683c7a
Archive: https://newsyai.com/newsy/123a3e34-f3cd-49a3-9a01-fbf9712fe766.md

---

# Graphene Weekly Digest
Your fun, plain‑English roundup of the one‑atom‑thick world. Week of November 20–26, 2025 (United States)

TL;DR: A fresh commercial deal puts graphene into solar cell pastes, and two new preprints light up rhombohedral graphene with field‑boosted, likely spin‑triplet superconductivity. Plus: a lab trick nudges bilayer graphene toward diamond‑like bonding under pressure.

## Materials & Production Breakthroughs

- Graphene paste goes commercial for perovskite solar cells  
  - First Graphene signed a 12‑month exclusive license with Halocell Australia to make and sell a graphene‑enhanced carbon paste already used in Halocell’s perovskite solar cells (PSCs). Production is slated to begin at FGR’s Henderson facility “within a month.” Deal terms include a 10% sales royalty to Halocell. Why it matters: carbon pastes are the “ink” layer in printable PSCs; adding graphene can improve conductivity and durability, helping roll‑to‑roll manufacturing. Note: an RTTNews brief cites Halocell’s claim of efficiency “>30%,” which should be treated as a company claim pending peer‑reviewed confirmation. ([prnewswire.com](https://www.prnewswire.com/news-releases/fgr-secures-exclusive-global-graphene-carbon-paste-production-and-sale-rights-302626371.html?utm_source=openai))

- Press‑to‑diamond: bilayer graphene takes on sp3 character under pressure and N‑doping  
  - A team reports that CVD bilayer graphene doped with nitrogen can be driven, under pressure, into a diamond‑like (sp3‑bonded) phase—no extreme heat required. Potential payoff: tunable, reversible hardening or band‑gap engineering in otherwise sp2 carbon films for wear‑resistant optics or switching devices. The next steps are dialing in dopant level, pressure, and substrates to balance mechanical and electronic properties. ([phys.org](https://phys.org/news/2025-11-coaxing-bilayer-graphene-diamond-layer.html?utm_source=openai))

## Quantum & Electronic Devices

- Field‑boosted superconductivity in thick rhombohedral graphene (heptalayer)  
  - New experimental preprint: superconductivity not only survives but is induced and stabilized by an in‑plane magnetic field, with critical fields far above the Pauli limit—pointing to spin‑triplet pairing. The authors also see a weak superconducting‑diode effect near a quantum anomalous Hall regime, hinting at interplay between valley imbalance and superconductivity. This broadens the phase space for device design well beyond “magic‑angle” bilayers. ([arxiv.org](https://arxiv.org/abs/2511.16578?utm_source=openai))

- Flat‑band surface‑state superconductivity in even thicker rhombohedral stacks (~13 layers)  
  - Companion preprint detects surface flat bands by layer‑resolved capacitance and observes multiple superconducting states localized to a single surface band, with strong Pauli‑limit violations consistent with triplet, valley‑singlet pairing. Strikingly, superconductivity can persist at zero displacement field (inversion symmetric), suggesting two surface superconductors weakly coupled through an insulating graphite bulk. Translation: devices could exploit “two‑surface” coupling as a knob. ([arxiv.org](https://arxiv.org/abs/2511.17423?utm_source=openai))

## Business & Ecosystem Pulse

- Market‑ready graphene paste heads for broader flexible‑electronics use  
  - Beyond perovskites, the FGR–Halocell paste is positioned for printed electronics and energy devices; the exclusivity window and rapid production start signal confidence in near‑term demand. Watch for customer sampling, cost/throughput numbers, and reliability data from roll‑to‑roll lines. ([prnewswire.com](https://www.prnewswire.com/news-releases/fgr-secures-exclusive-global-graphene-carbon-paste-production-and-sale-rights-302626371.html?utm_source=openai))

---

## Quick Bites

- “Diamond‑like” graphene isn’t new in spirit, but doing it in doped bilayers at lower thermal budgets is the noteworthy twist—think protective, transparent, or mechanically switchable coatings you could actually process near real devices. ([phys.org](https://phys.org/news/2025-11-coaxing-bilayer-graphene-diamond-layer.html?utm_source=openai))

- Rhombohedral graphene keeps stealing the spotlight from magic‑angle bilayers: big Pauli‑limit violations and diode‑like behavior scream “unconventional pairing,” which is catnip for quantum device engineers. ([arxiv.org](https://arxiv.org/abs/2511.16578?utm_source=openai))

---

## Eyes on the Horizon

- Designer superconductors you can pattern, stack, and bias  
  - If spin‑triplet, field‑enhanced superconductivity in rhombohedral graphene holds up across labs, expect a wave of devices that use in‑plane fields and electrostatics as “dials” for switching supercurrents, building non‑reciprocal elements (superconducting diodes), and maybe fault‑tolerant logic motifs. Industrial‑grade questions: uniformity over mm‑scale devices, thermal margins, and compatibility with standard cryo‑electronics. ([arxiv.org](https://arxiv.org/abs/2511.16578?utm_source=openai))

- Printable solar, now with graphene “go‑faster” paste  
  - A ready‑to‑ship graphene carbon paste for PSCs could help push perovskites from pilot to product. The near‑term wins to look for: better sheet resistance at thin thickness, fewer cracks on flex, and longer damp‑heat lifetimes. If the cost per watt pencils out, graphene inks could also bleed into flexible RF tags and sensor stickers. ([prnewswire.com](https://www.prnewswire.com/news-releases/fgr-secures-exclusive-global-graphene-carbon-paste-production-and-sale-rights-302626371.html?utm_source=openai))

- Phase‑switchable carbon skins  
  - The pressure‑plus‑dopant route to sp3 bonding suggests future coatings that harden on demand or shift from conductive to insulating with a mechanical trigger. Imagine scratch‑proof phone optics, hard masks you can “write” and then erase, or protective layers for MEMS that survive abrasion. Key hurdles: reversibility, cycling fatigue, and process integration below device‑damage thresholds. ([phys.org](https://phys.org/news/2025-11-coaxing-bilayer-graphene-diamond-layer.html?utm_source=openai))

Stay curious. The magic isn’t just the monolayer—it’s turning lab‑fresh tricks into reliable, affordable gear for energy, health, and next‑gen chips.
